Notifications
Clear all
Yes.... add the BAUD(0)=115200 or an OCHN command.
(sorry.. had a typo on this due to posting from an iphone)
Posted : 19/06/2014 8:58 am
Added BAUD(0)=115200
Same issue
Upgraded firmware in all motors from 5.0.4.7 to 5.0.4.8
Still same.
No comms on powerup, until motors initially connected with SMI software.
Posted : 19/06/2014 9:16 am
Is the system working now? ...or does the problem still exist?
Posted : 19/06/2014 10:23 am
Page 2 / 2
Prev