|
SMNC
is a G-Code based Servo Motion Control System that delivers multi-axis
contouring without an expensive control panel and without a cabinet
full of controls. With a suite of features, SMNC can convert CAD-dxf
files into motion control g and m codes. With SMNC Software, one
can deliver 3 axes of CNC at a cost comparable to a single annual
service call for a traditional machine.
SNC features a main screen similar in appearance to a traditional
CNC system.
Along with a host of features comparable to a CNC system, SMNC includes:
 |
* Linear and Circular motion control of multiple axes
* Configure Motors across multiple Serial ports
* Ability to set up on axis to mimic or copy another for gantry
systems
* Smooth control of accel/decel for sensitive curvilinear
motion
* Large Numerical display
* DXF input available
* 6 axis of control (includes axes mimic and Spindle)
* RS232 and/or RS-485 communication
* User definable M-Codes
* Each axis is configurable to match your hardware
* Side-screen displays your source code as it is executed
|
As
of 6/01, SMNC supports the following codes.
|
Codes |
Description |
|
G00 |
Rapid Motion |
|
G01 |
Linear Motion |
|
G02 |
Clockwise Circular Arc |
|
G03 |
Counterclockwise Circular Arc |
|
G04 |
Dwell |
|
G17 |
X-Y Plane Selection |
|
G18 |
Z-X Plane Selection |
|
G19 |
Y-Z Plane Selection |
|
G20 |
Change units to Inch |
|
G21 |
Change units to Millimeter |
|
G28 |
Return to 1st reference point |
| G30 |
Return
to 2nd reference point |
| G40,41,42 |
Cutter
Compensation |
|
G54… G57 |
Coordinate system 1 .. 4 |
| G58,G59 |
Coordinate
system 5, 6 |
|
G76 |
Repeat a section of the program |
|
| Codes |
Description |
|
G90 |
Set Absolute coordinates |
|
G91 |
Sets Relative coordinates |
|
G92 |
Set Coordinate System Offset |
|
F |
change federate |
|
S |
change spindle speed |
| M0 |
Pause |
|
M02 |
End Program |
|
M03 |
Spindle On (CW) |
|
M04 |
Spindle On (CCW) |
|
M05 |
Spindle Off |
|
M08 |
Coolant On |
|
M09 |
Coolant Off |
|
M30 |
Program End and Reset I/O |
More
codes and capabilities are being added
every month. |
|
|
