PW108 and PW116

The PW108 and PW116 pushweheels are used to input data to any AniLink equipped controller. An example could be feed length and cycle count inputs on a cut-to-length application. The PW108 mounts up to eight push wheel BCD switches on a single peripheral card, the PW116 has slots for up to sixteen. These switches have ten positions, labeled from 0 to 9. Each switch can be sequenced either up or down using push buttons. Each unit takes up 1 AniLink port address. Every digital switch is addressed by its own circuit, allowing the integrator complete control over use within a user program. All switches need not be present for normal operations. Simplifying panel or console mount applications, the push wheel switches can be mounted up to 10 feet (3m) from the PW1XX AniLink card. The PW108 and PW116 are plug compatible with Series 5000 and SmartMotors controllers. Up to eight can be uniquely addressed on a single AniLink bus.

Features
Eight or sixteen digit input.
Digits independently addressed.
Clear ¼ inch characters.
Removable switch blocks.

Benefits
Allows numeric input for stand alone controller applications.
Maximum user programmability and system flexibility.
Crisp white on black lettering with a wide viewing angle.Excellent for panel or console mount applications.
Allows remote mounted, simplifies panel mount.