HIGH PERFORMANCE PLANETARY GEAHEADS Download Complete Drawings
Bearing Life VS. Shaft Load
Part # Ratio Continuous output torque at 1500 rpm input (in-lbs) Continuous output torque at 3500 rpm input (in-lbs) Continuous output torque at 5000 rpm input (in-lbs) Gearhead intertia at input (lb-in-sec2)
Single Stage:    Standard backlash = 6 arc-minutes
GH23P3

3:1

442

292

232

1.22 x 10-4
GH23P4
4:1
 410 294 242 5.24 x 10-5
GH23P5.5
5.5:1
 373 288 247 2.65 x 10-5
GH23P7
7:1
 344 279 245 1.93 x 10-5
GH23P10
10:1
 277 238 215 1.35 x 10-5
Double Stage:    Standard backlash = 10 arc-minutes
GH23P16
16:1
 521 463 427 5.32 x 10-5
GH23P22
22:1
 536 490 460 2.70 x 10-5
GH23P28
28:1
 545 506 481 1.96 x 10-5
GH23P40
40:1
 553 525 506 1.36 x 10-5
GH23P49
49:1
 400 385 375 1.90 x 10-5
GH23P55
55:1
 460 443 432 1.34 x 10-5
GH23P70
70:1
 404 393 385 1.33 x 10-5
GH23P100
100:1
 308 303 298 1.33 x 10-5

Features:
* Dynamic radial shaft seal at the input and output.
* Enclosure rating = IP65.
* Operating temperature range = - 20 F to 250 F.
* Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell.
* Alloy steel powder coated ring gear.
* Quality sealed radial ball bearings.
* Stainless steel output shaft.
* Hardened precision gearing throughout.
* Precision clamp on pinion with four clamping screws to eliminate slippage.
* PEAK TORQUE is 15% above continuous rating. NOTE: Repeated peak torque loading may cause failure.
OEM SERIES PLANETARY GEAHEADS Download Complete Drawings
Bearing Life VS. Shaft Load
Part # Ratio Continuous output torque at 1500 rpm input (in-lbs) Continuous output torque at 3500 rpm input (in-lbs) Continuous output torque at 5000 rpm input (in-lbs) Gearhead intertia at input (lb-in-sec2)
Single Stage:    Standard backlash = 12 arc-minutes
GH23SP004 4:1 185 133 109 4.19 x 10-5
GH23SP007 7:1 155 126 110 1.54 x 10-5
GH23SP010 10:1 125 107 97 1.08 x 10-5
Double Stage:    Standard backlash = 16 arc-minutes
GH23SP016 16:1 214 190 175 4.26 x 10-5
GH23SP028 28:1 223 208 197 1.57 x 10-5
GH23SP049 49:1 164 158 154 1.52 x 10-5
GH23SP070 70:1 166 161 158 1.06 x 10-5
GH23SP100 100:1 126 124 122 1.06 x 10-5

Features:
* Dynamic radial shaft seal at the input and sealed bearings at the output.
* Enclosure rating = IP54
* Operating temperature range = - 20 F to 250 F.
* Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell.
* Alloy steel powder coated ring gear.
* Quality sealed radial ball bearings.
* Stainless steel output shaft.
* Hardened precision gearing throughout.
* Precision clamp on pinion to eliminate slippage.
* PEAK TORQUE is 15% above continuous rating. NOTE: Repeated peak torque loading may cause failure.
HIGH PERFORMANCE RIGHT ANGLE GEAHEADS Download Complete Drawings
Part # Ratio Continuous output torque at 1500 rpm input (in-lbs) Continuous output torque at 3500 rpm input (in-lbs) Continuous output torque at 5000 rpm input (in-lbs) Gearhead intertia at input (lb-in-sec2)
Single Stage:    Standard backlash = 10 arc-minutes
GH23RAP3

3:1

280

280

273

2.94 x 10-4
GH23RAP5.5 5.5:1 280 280 280 7.77 x 10-5
GH23RAP7 7:1 280 280 280 5.09 x 10-5
GH23RAP10 10:1 280 280 280 2.90 x 10-5
Double Stage:    Standard backlash = 14 arc-minutes
GH23RAP16 16:1 350 350 350 5.93 x 10-5
GH23RAP22 22:1 350 350 350 3.02 x 10-5
GH23RAP28 28:1 350 350 350 2.16 x 10-5
GH23RAP40 40:1 350 350 350 1.46 x 10-5
GH23RAP49 49:1 350 350 350 1.96 x 10-5
GH23RAP55 55:1 350 350 350 1.39 x 10-5
GH23RAP70 70:1 350 350 350 1.36 x 10-5
GH23RAP100 100:1 350 350 350 1.35 x 10-5
 
|  Home   |   About Us  |   Products  |   Sales  |   Support  |   Press and Literature  |  Contact Us   |   Site Map  |
Animatics Corporation. 3200 Patrick Henry Drive, Santa Clara, CA, 95054 Tel: +1 408.748.8721
Copyright © 2008   All rights reserved.  Any comments or problems email webmaster