DINIO 7

Wiring Input/Output up to your SmartMotor is made simple with the DINIO7 breakout board. The DINIO7 has slots for 7 industry standard Opto Modules. This is a DIN rail mount adapter that allows the SmartMotor™ to easily interface to popular Input/Output blocks like those produced by manufacturers such as Gordos, Grayhill, Opto-22 and others. It can be used with either input or output modules. The DINIO7 has a 9 pin connector for direct connection to a personal computer serial RS-232 communications port and an AniLink network connector. It is also equipped with an expansion bus to allow it to interface with other Animatics DIN rail mount adapters.

Features
* DB-15 or screw terminal access to your SmartMotor™.
* AniLink port for expansion to other AniLink™ devices.
* 7 main I/O buses to cross connect I/O to other motors.
* 4 aux buses to interconnect encoders between motors.
* Differential encoder I/O expansion (optional).
* Jump-in RS-485 terminal resistors.
* On board DB-9 for fast RS-232 access.
* Easy din rail mount and screw terminal I/O hook-up.

Benefits
* Easy connection for panel environment.
* Cascadable.
* Flexible use.
* Simplifies encoder connections.
* Strong noise immunity.
* No added parts necessary for RS-485 termination.
* Uses standard cables.
* No screws needed for mounting.

Electrical:
* Power bus line voltage: 19V to 48VDC
* Isolated communications: 4.5V to 5.5V
Optional differential XCVR power: 90 mA typical

Mechanical:
Dimensions: see figure
Weight: 15 oz (425 g)